How to calculate remote work costs: a Worksmile case study

How do you calculate remote work costs? As CFO of Worksmile – a platform that brings together company communication, absence management and employee benefits in one place – I asked myself this very question. The amendment to the Labour Code (Kodeks pracy) came into force a few weeks ago, but the remote work provisions will apply from 7 April. Many employers are using the remaining time to prepare their organisations for remote work.
In this article I do not intend to focus on typical HR and administrative issues – although they are a significant part of the challenge employers face. For those, I recommend the Worksmile webinar (available here), which covered the most important aspects of the new regulations. I would like to focus on the aspects of remote work closest to my role – namely calculating remote work costs.
1. Compliance – staying within the law
To begin with, it is worth noting that in the vast majority of cases remote work will concern office workers, whose basic equipment is a computer (usually a laptop) and a phone. It is with this situation in mind that I will calculate remote work costs in the following paragraphs. But let us start by outlining the framework set by the Labour Code.
Legal basis – the Labour Code
The amended Labour Code, in Art. 67 24 § 1 point 2, states that:
The employer is obliged to provide an employee working remotely with the installation, servicing and maintenance of work tools, including technical equipment, necessary to perform remote work, or to cover the necessary costs related to the installation, servicing, operation and maintenance of work tools, including technical equipment, necessary to perform remote work, and also to cover the costs of electricity and telecommunications services necessary to perform remote work.
Further on, in § 4, we read that:
The obligation to cover the costs referred to in § 1 points 2 and 3, or to pay the equivalent referred to in § 3, may be replaced by an obligation to pay a flat-rate allowance (ryczałt), the amount of which corresponds to the expected costs incurred by the employee in connection with performing remote work.
The Code therefore explicitly states that the employer should cover the costs of:
- setting the employee up for remote work,
- electricity and internet.
These remote work costs can be covered through an equivalent (understood as covering actual costs 1:1) or a flat-rate allowance (an amount calculated according to a fixed rate).
Helpdesk for remote employees
When it comes to covering the costs of organising a remote workplace, I assume that employers will offer IT support (Helpdesk) remotely. It is hard to imagine a scenario in which companies leave employees to fend for themselves and perhaps agree to cover the costs of third parties (not authorised in any way).
Remote work costs – electricity and internet
As for covering the remote work costs of electricity and internet, it will be necessary to establish a method for calculating these costs and reimburse them in one of the two permitted forms – an equivalent or a flat-rate allowance.
Which costs does the employer NOT have to cover?
The amended Code does not require employers to cover remote work costs related to workstation equipment, such as a desk or a chair. What is more, in order to work remotely, an employee declares that they have suitable conditions to do so. It is therefore hard for them to argue that they must be given equipment or funds for it. Of course, there are employers who care about the wellbeing and engagement of their employees (and can afford to) and will provide them with an additional monitor or an ergonomic chair. In my opinion, however, this is not a statutory obligation of the employer.
2. Flat-rate allowance or equivalent – how do you calculate it?
Personally, I am a supporter of Occam’s razor, the principle that we should strive for simplicity when explaining phenomena. According to this principle, we choose explanations based on as few concepts and assumptions as possible. What does this mean here? Definitely a flat-rate allowance. And one that is as uncomplicated as possible – without excessive differentiation between employees by job level or the department they work in.
How do you calculate remote work costs in practice?
The amended Code states that when setting the amount of the equivalent or flat-rate allowance, the following are taken into account in particular:
- standards for the consumption of materials and work tools, including technical equipment, and their documented market prices,
- the quantity of material used for the employer’s needs and the market prices of that material,
- electricity consumption standards and the costs of telecommunications services.
Step one: How much electricity will a remote employee’s work tools use?
So let us start by establishing how much electricity a remote employee’s work tools will use. There are several ways to do this:
The most accurate method – using a wattmeter
Yes, I know – it sounds crazy, but this simple device costs around PLN 50 and is available in most electronics stores and online shops. You plug your equipment into the mains through the wattmeter and read off the energy value.
The quickest method – using rating plates
You can check the rating plates or the labels on power supplies or equipment. Bear in mind, however, that the values on them are, as a rule, maximum rather than average values, so this will be the most expensive version.
Something in between – using data from the internet
Google for traditionalists, ChatGPT for geeks – from either you will learn that an average office laptop uses 30 to 60 watts during normal use, such as browsing websites and editing documents. During more intensive tasks, however, such as gaming or video editing, power consumption can rise to 100 watts. A desktop computer can use 300 W (gaming machines even several times more).
For now, I have chosen the quickest option, using a wattmeter.
My Dell Latitude laptop with an i7 processor has 90 W stated on its power supply. The monitor (24-inch Dell) – 20 W. That makes 110 W in total, which over 8 hours of work gives 0.88 kWh (110 : 1,000 x 8).
After testing my equipment’s energy consumption with a wattmeter, I corrected this result. During a 20-minute test the laptop used almost 0.021 kWh, which works out at 0.063 kWh per hour. The monitor, in turn, drew 0.005 kWh during a 15-minute test, i.e. 0.02 kWh per hour.
At this point, some will ask why 8 hours, since the Labour Code requires an employee working at a screen to take a 5-minute break every hour, plus a 15-minute break counted as working time when working at least 6 hours (Art. 134 of the Labour Code). You could therefore say that an employee on an 8-hour day uses the equipment for 7 hours and 5 minutes.
From my perspective, this sounds like excessive zeal on the employer’s part, because I would not expect an employee taking a 5-minute break every hour to switch off their computer and work, say, “on paper”. But at a certain organisational scale, those 55 minutes can also have a significant financial dimension – more on that later.
The cost of lighting a remote workplace
There is one more issue I did not include in my initial calculation. The employer is obliged to ensure adequate lighting of the workstation. This is set out, among others, in regulations of the Minister of Labour and Social Policy.
The employer should therefore include the cost of additional lighting for the employee’s workplace as a component of the flat-rate allowance. As far as I can tell, a desk lamp usually uses an LED bulb of no more than 10–11 W, which means energy consumption of 0.011 kWh.
Adding up the electricity consumption of the laptop, monitor and lamp, we get daily electricity consumption for remote work of:
0.063 kWh + 0.02 kWh + 0.011 kWh = 0.094 kWh per hour = 0.752 kWh over 8 hours
Step two: What is the rate for 1 kWh?
The next step is to establish the rate for 1 kWh. The simplest way is to look at your household electricity bill (assuming it is based on actual consumption rather than advance payments). Then divide the gross amount of the bill by the amount of energy used in the period. I advise against reading the rates directly from the bill, because they are usually net (excluding VAT and excise duty) and incomplete, as they do not include fixed charges (e.g. distribution costs). In my case, the January bill gives a result of PLN 0.77/kWh.
Unfortunately, there are potential complications here too, because:
- the January rate is probably based on old tariffs in most cases. Rates for 2023 can be expected to rise once they are approved by the Energy Regulatory Office (URE),
- the price of energy in 2023 will depend on annual consumption, i.e. up to the well-known threshold of 2,000 kWh per year it will remain at last year’s level, but above that it will rise.
The rate after the increase
That is why, for further calculations, I will use my rate of PLN 0.77/kWh increased by the expected 29% rise in energy costs (according to the wysokienapiecie.pl portal, the increase covers the price freeze, the return of excise duty and VAT, and the expected rise in electricity distribution prices), which gives PLN 0.99/kWh. I am also doing this so that I do not have to revise the rate in 2–3 months.
To sum up, according to the methodology above, a day of remote work means an electricity cost of 0.752 kWh x PLN 0.99 = PLN 0.75.
Step three: What does the internet cost?
In many publications and on LinkedIn, there are opinions – even from experts I greatly respect – that “using a private internet connection for remote work costs the employee nothing extra”. Even if this is true in many cases (people working remotely already have internet, so they do not incur any additional or incremental remote work cost), I am not convinced by the argument that employees should not be compensated for this expense for that reason.
They may argue that to connect to a company server or hold a teleconference, for example, they need a certain internet speed, and that for their own private needs a lower one would suffice. That is why I would be careful with the approach that “nothing is due for the internet”. Unless employees get mobile internet from us, for example on a company phone.
Home internet fee
Again, I will use my own example – I pay PLN 50 gross a month for a fibre-optic connection. This can be divided per day (Occam’s razor), which gives roughly PLN 1.67 a day for the internet.
Some will say that this way we reimburse the employee for a whole day of internet, while they spend their evenings binge-watching series.
For the meticulous (or simply thrifty), I think it is a good idea to convert this into hours:
PLN 1.67 a day : 24 hours x 8 working hours = PLN 0.56 a day for the internet.
Step four: What are the remote work costs?
Adding up the cost of electricity and the cost of the internet gives us the daily flat-rate allowance for remote work.
In total, the statutory minimum gives us:
PLN 0.75 + PLN 0.56 = PLN 1.31 a day as a flat-rate allowance for remote work.
3. Potential pitfalls best avoided
Monthly vs daily rate
I assume that some readers may wonder why I do not calculate my flat-rate allowance on a monthly basis. The reason is simple – an employee is entitled to the equivalent or flat-rate allowance for the period actually worked remotely. What does this mean?
- When an employee is on annual leave, they are not working, so they cannot receive reimbursement of remote work costs for that day.
- Employees may work remotely to different extents and should not be treated the same. For example, a developer who works remotely 5 days a week and lives 300 km from our head office should not receive the same reimbursement as an administrative employee who works remotely just 1 day a week (I am not talking about occasional remote work).
That is why, in my view, a daily rate is much more practical. For employers with many part-time staff, it could even be an hourly rate.
Tax-deductible costs (KUP) and ZUS contributions
Under the amended provisions of the Labour Code, Art. 67 25:
Covering the costs related to an employee’s performance of remote work and paying a cash equivalent or a flat-rate allowance do not constitute income within the meaning of the Personal Income Tax Act of 26 July 1991.
In other words, it works much like mileage allowance or per diems for business travel. This is a good solution because it is cheaper for everyone. But it also has a dark side – namely the risk that the authorities, whether tax or social insurance, will challenge the amount of the flat-rate allowance paid.
I have already seen press reports about employers who want to pay employees, for example, PLN 1,000 a month this way. That is nice of them, but it sounds like a potential risk of being challenged by the Social Insurance Institution (ZUS) and the tax office, and consequently having to pay tax and social security contributions on it (plus possible penalties for the employer). So I would avoid such “generosity”.
Energy prices and consumption standards
I think the previous paragraphs showed how many possible ways there are to calculate both the standards for equipment’s electricity consumption and electricity rates. I imagine this is particularly difficult in large organisations where employees are spread across different regions (different electricity rates), have different equipment (e.g. two monitors, a printer, a desktop computer, etc.) or live in different houses and flats. That is why it will be very important to properly document the process of setting these standards and to be open to reviewing it regularly.
Employees waiving reimbursement of remote work costs
I know that halfway through, some readers also thought it might be better to drop the whole thing, give employees some kind of pay rise (or not) and avoid complicating processes and tasks. After all, administering it may cost much more than the reimbursement itself. Remember, however, that:
- An employee (not to mention the employer) cannot waive the equivalent or flat-rate allowance.
- If we do not introduce partial or full remote work in the organisation (which is all the reimbursement applies to), and our employee uses up the statutory limit of 24 days of occasional remote work, they will be entitled to reimbursement of costs for every further day of remote work.
Other remote work costs
The law explicitly mentions the costs of energy and telecommunications services (internet), but the employer may decide to cover other costs. What costs are we talking about? For example, depreciation of furniture and household equipment used by the employee, coffee and tea or the proverbial fruit Tuesdays.
Remember that the amendment to the Labour Code explicitly states (Art. 67 29) that:
An employee may not be discriminated against in any way because they perform remote work or because they refuse to perform such work.
I have already heard ideas and demands for delivering citrus fruit to remote employees’ homes on the days when it is available in the office. This issue can be “defused” with a certain surplus on top of the electricity and internet reimbursement.
4. Covering yourself – internal documentation
Regardless of the method used to set electricity consumption standards, internet costs and electricity rates, I fully recommend that all employers prepare internal documentation on how remote work costs are reimbursed to employees.
Why is it worth it?
- It is an excellent way to go through the process in a methodical and orderly way.
- It is a very helpful material for consultations with employees.
Remember that Art. 67 20 states that:
The rules for performing remote work are set out in an agreement concluded between the employer and the company trade union organisation, (…) If there are no company trade union organisations at a given employer, the employer sets out the rules for performing remote work in internal regulations after consulting employee representatives selected in the manner adopted by that employer.
- It will also be material that helps the employer revise the rates and consumption standards after some time.
- Finally, in the event of a dispute with the tax authorities or the Social Insurance Institution (ZUS), it can be pulled out of the drawer. That is why, in my opinion, such internal documentation should include a comment on how the standards and rates were set and on any other items (e.g. the “furniture” allowance mentioned earlier).
Calculating remote work costs – practical tips
As I mentioned, it is worth considering a wattmeter. You probably do not need to check all the equipment – sampling is a standard method for establishing values in large data sets. The key is for the sample to be well chosen (representative).
A second idea – how to set the electricity rate – ask our employees, at least those we consult on the remote work rules, but perhaps more widely, to show their electricity bills. Here, too, we will have a sample that lets us establish the cost of 1 kWh of electricity or of the internet. Of course, employees may refuse – in that case we do it “our own way”, but we automatically counter the staff’s argument that the rate may be too low.
Another practical approach to calculating remote work costs is to use a daily rate instead of a monthly one.
Remote work costs through the eyes of a CFO
As you can see, employers have plenty to do – just in calculating the flat-rate allowance for remote work. And this aspect of implementation is one of many (perhaps even one of the easier ones). You need to keep in mind the whole paperflow related to implementation, but above all to the day-to-day running of remote work afterwards.
This is where one of the newest features of the Worksmile platform comes in – employee absence management, which helps employers set up the remote work administration process correctly.
Unfortunately, for companies, the changes introduced in the Labour Code simply mean higher costs, because until now each of us had people working remotely and it generated no costs. Employees were happy too, because they had a few extra hours a week for their own needs.
Any savings from having a smaller team on site and lower office costs have long since been factored into our forecasts and budgets. Now there is a new cost that we cannot avoid. It can only be optimised, which will not bring significant savings with a dozen or so employees, but with, say, 1,000 full-time positions it will.
For example: a difference of PLN 0.50 a day in the rate, in a 3 : 2 hybrid work model (3 days remote and 2 days in the office) for the whole team, gives a difference of around PLN 80,000 a year.
What is more, many employers are already bending over backwards to bring their employees back to the office. The amendment to the Labour Code will certainly not make it any easier for them.
What support can you get when implementing remote work in your company?
Employers and HR, payroll and administration teams face a huge challenge in handling the new processes related to remote work. Instead of introducing changes on your own, doing it manually, losing time and incurring additional costs, use the modern Worksmile Platform, which will do up to 50% of the work for you.
See how you can automate the handling of remote work requests or book a meeting to learn more.
Want to know how effective your internal communication is? Don’t guess – find out where you stand by measuring the effectiveness of your internal communication! See how to measure it >


